UL-Listed Combo Kit, Without 15KW Sol-Ark, with 61.2kWh Pytes LiFePO4 batteries 15kw Mono-crystal Bifacial 144 Cell Solar Panels, all approved for California and more – Deal! (Copy)

Description

With More and more States/counties getting strict, we have this awesome package for you (compare online at $33k + without solar panels)

NOTE, this package DOES NOT INCLUDE A SOL ARK Inverter

Includes :

Pytes 61kWh batteries (12 x 5.12kwh), UL Listed UL9450A +++, got more approvals than almost any other battery . (Any other battery may not have local approval, and may not be able to communicate with Sol-Ark )

2 x PYTES Forest RB Expandable Battery Enclosure ( 6 batteries per Enclosure) NOTE: This battery enclosure comes with all required battery cables to connect six Pytes batteries to the included busbars , see link

12 Pairs 4 AWG Pytes battery cables 6 ft ( busbar not required, as these will all be terminated in the Sol-Ark)

15kW + of Canadian/ BYD / Boviet 550W Bifacial Solar Panels (27 pcs + 4 free for breakage)

500 ft Red + 500 Ft Black UL 10 AWG Solar cable

12 Ft 2/0 AWG RED and 12Ft Black + 4 lugs

Certifications:

All Certifications neccessary for California Inspections

Connection method for batteries.

Connect all batteries in parallel via cable provided to the Sol-Ark

Set the dip switches to position “1” Dip switch ON

Connect all short Cat5 cables between batteries

Battery with Link Port 0 empty will be MASTER (connect CAT5 cable from this battery to Sol-Ark CANBus Port)

Set battery type to Lithium, and thats it!

https://watts247.az3.infogenixdev.com/manuals/battery/PYTES/

https://watts247.az3.infogenixdev.com/manuals/Solar%20Ark/

Instructions to set up communications between PYTES and SOL-ARK (See images in listing)

1) Set Dip switch 1 to ON, for ALL PYTES Batteries

2) Link All PYTES batteries together with CAT5 link cables provided (Link port 1 to Link port 0 of the next battery)

3) Connect CAT5/ 6 cable between OPEN PORT – LINK PORT 0 on battery to CANBUS port on Sol-Ark

4) On SOL-ARK, set BMS Lithium Batt to “00” default

5) Check “Activate Battery” checkbox

6) Exit menu , and click Li-Batt Info, should display real live numbers, disconnect battery comms cable to verify a screen change, to prove communication is successful.